USE: Level control for liquids; particularly suitable for use in purification tanksand/or systems as well as sewage channels and the waste water of these channel, septic tank discharges, industrial water, etc. provided they do not contain sedimentation and compact layers that could hinder its movement. Partycularly recommended for situation where short, frequent fluctuations may occur in the temperature range of 4° to 60° C, without causing the operation temperature to exceed the limit specified in the table. The TITANIO floating switch is composed of a blow-moulded polypropylene monobloc outer body, featuring a counterweight fixed inside in the exit area of the cable, a switch (16 (4) Amperes 250 Volts 50/60 Hz) set centrally on its own sealed chamber with a water-tight polypropylene monobloc body sealed by injection overmolding using the same material. Since this chamber is insered into a container, again monobloc called the "outer body", and then sealed inside the cavity with a closed cell, bicomponent farm - wich is itself capable of chieving not only high thermal insulation, but also a barrier against infiltration - the float can be considered as built wkith a triple protection chamber. If necessary, the TITANIO floath can be outfitted for use in the presence of oils and, such case, supplied with a suitable power supply cord.
Certification
floatswitch Titanio - commutatore a galleggiante Titanio
Split
Technical drawing
Pit loading
Pit unloading
