Level regulator for clean waters 10 (8) A
Corrente nominale 10 (8)A / 250 V, equipaggiato con microinterruttore ad elevate prestazioni con contatti autopulenti.

The advanced constructive technology, the quality of used components, the design and strict controls, make of the TECNO level
regulator a highly reliable and economic equipment, for applications in civil and industrial plants (wells, tanks, cesspool) and in
all that cases where it is necessary to control the level of non-aggressive liquids. TECNO 2 is supplied with microswitch 21A for
applications on motors up to 2HP. The external covering is constuted by an antishock polypropylene material, suitable to contact
with foods and it is sealed by over moulding of the same material injected by pressure at 250° C. Available in various colors.
Certification

Colours

Technical drawing

Technical drawing

NO or NC VERSION WITH GROUND
( Insulation class I )
Technical drawing

SWITCHING VERSION
( Insulation class II )
STANDARD CABLE
PVC A05W-F 3x1 mmp (Double function) |
H07RN-F 3G1 - 3G1.5 mmp (Double function) |
H07RN-F 3X1 mmp (Emptyng, filling on request) |
H07RN-8F 3G1 mmp (Emptyng, filling on request) |
FOR THE VERSION WITH EARTH SPECIFY IF IT NEEDED FOR FILLING OR EMPTIYNG
SPECIFICATIONS
Operating temperature | 50 °C |
Storage temperature | -20/80 °C |
Operating voltage | 230 V a.c. |
Max switching voltage | 250 V a.c. |
Frequency | 50-60 Hz |
Upper switching angle | 30° ±5° |
±Lower switching angle | 30° ±5° |
Current with resistive load | 10 A |
Current with inductive load | 8 A |
Microswitch capacity | 21 A |
Protection level | IP 68 |
Operating pressure | 2 bar |
Dimensions | 153 x 92 x 43 mm |
Weight | 170 g |
Volume | 280 cm³ |
Material | Floating dody in non-toxic material |