INVERTER FOR ELECTRIC PUMPS CONTROL

• It controls the starting and stopping of the electric pump and modulates the motor rotations according to the water request from
the system. Hammering is reduced and inrush starting current avoided.
• Constant pressure.
• Energy saving.
• Protection against dry running.
• Automatic reset in event of dry running.
• Protection against leakages, over pressure, over heating, rotor blocking and abnormal power supply.
• Motor over current control.
• Digital indication of the pressure, the voltage, the current and the motor frequency.
• Automatic maximum frequency reduction with temperature.
• Programmable input and output for different functions (enable, double set-point, error, master/slave configuration).
• Multilingual display.
Optionals – special arrangements :
• I/O expansion card available.
• Cable for connection in twin booster sets 4x0.5 mm2 100 cm (SR-CBL4X05-100).
• Interface module SIRIO X4.
• Power supply protection module.
• Version for high speed motor pump (90/100/140 Hz).
• Version for IPM motors.
Certifications :
UL (Sirio 140Hz 3x230V - Sirio Entry 60 Hz 1x230V) - File E332209
INSTALLATION : We suggest to install a 2 lt tank

TECHNICAL DRAWING

SPECIFICATIONS :
Power mains supply |
monofase 230Vac ±10% 50/60Hz |
Motor power output |
monofase 220V~ |
Max motor power |
1800W - 2,4Hp 14 A |
Max allowable pressure |
800 KPa (8 bar) |
Max fluid temperature |
35°C |
Pressure drop |
0,1 bar at 150 l/min |
Set-point adjustment range |
1,5÷7 bar |
Hydraulic connection |
maschio-maschio 1” ¼ |
Max ambient temperature |
45°C |