SHUTTLE float switch


Float switch for waste water (patented) with high thermal insulation and triple protection chamber.

Rated current 10 (8) A /250 V. equipped with high performance microswitch with self-cleaning contacts

Float switch for waste water made in italy

Level control for liquids, particularly suitable for use on purification tanks and / or system as well as sewage channel and the waste water of these channels, septic tank discharges, industrial water, otc. provided they do not contain sedimentation and compact layers that could hinder its movement. Particulary recommended for situation where short, frequent fluctuations may occur in the temperature range of 4° to 60° C, without causing the operating temperature to exceed the limits specified in the table. The “SHUTTLE” floating switch is composed of a blow moulded polypropylene monobloc outer body, a switch (21 (8) Amperes 250 Volts 50/60 Hertz) set centrally on its own sealed chamber with a water-tight polypropylene monobloc body sealed by injection overmolding using the same material. Since this chamber is inserted into a container, again a monobloc called the “outer body”, and then sealed inside the cavity with a closed cell, bicomponent foam — which is itself capable of achieving not only high thermal insulation, but also a barrier against infiltration — the float can be considered as built with a triple protective chamber. If necessary, the “SHUTTLE” float can be outfitted for use in the presence of oils and, in such case, supplied with a suitable power supply cord.

Certification

  • Floatswitch for waste waters - commutatore a galleggiante per acque reflue
    Floatswitch for waste waters - commutatore a galleggiante per acque reflue
  • commutatore a galleggiante per acque reflue shuttle - floatswitch for waste waters
  • Floatswitch for waste waters - Regolatore di livello per acque reflue
    Floatswitch for waste waters - Regolatore di livello per acque reflue
  • floatswitch Shuttle - commutatore per acque reflue
    Floatswitch for waste waters - Regolatore di livello per acque reflue
  • Floatswitch "Shuttle" - commutatore a galleggiante " Shuttle "
    Floatswitch for waste waters " Shuttle " - commutatore a galleggiante " Shuttle "
  • commutatore a galleggiante per acque reflue shuttle - floatswitch for waste waters
    commutatore a galleggiante per acque reflue shuttle - floatswitch for waste waters

Technical drawing

Float switch for waste water

Technical drawing

Scheda tecnica commutatore galleggiante Shuttle

CONNECTION DIAGRAM

Standard Cables

PCV A05VV-F 3X1

mmq (Double Function)

H07RN-F 3X1

mmq (Double Function)

Specifications

Operating Temperature 50 °C
Storage Temperature -20 / 80 °C
Operating voltage 230 V a.c.
Max switching voltage 250 V a.c.
Frequence 50-60 Hz
Upper switching angle 30° ±5°
Lower switching angle 30° ±5°
Current with resistive load 10 A
Current with inductive load 8 A
Microswitch capacity 21 A
Protection level IP 68
Insulation class II
Operating pressure 10 Bar
Dimensions 165 x 96 x 53 mm
Weight 257 g.
Volume 420 cm³
Material Floating body in non-toxic material