BRIO TOP


ELECTRONIC DIGITAL DEVICE FOR ELECTRIC PUMPS

• Suitable for water pumping systems with pressure tank as digital pressure switch, or as flow and pressure controller.
• Pressure values adjustable via digital display.
• Pressure values and motor current showed on the display.
• Automatically controls starting and stopping of single phase electric pumps up to 16A (3 HP).
• Protection against dry running.
• Automatic reset in event of dry running.
• Motor over current control which trips in the event of overload or with the rotor blocked.
• Anti-freeze protection which starts up the pump when the ambient temperature falls below 4°C.
• Rotor anti-blocking function used to prevent seizure of mechanical parts during prolonged periods of pump inactivity.
• Overpressure protection able to stop the electric pump at a set threshold.
• Installation in any position – both vertical and horizontal.
• Operation in master/slave configuration into twin booster sets.
• Terminals for remote connection (1 input + 1 output).
• Alarm log for simple analysis of any system malfunctions.

Optionals – special arrangements

• Version with electrical cables for motor and line connection.
• Hydraulic connections with revolving nut 1”F for pipe union.
• 1” plastic elbow for a quick installation of the device on the electric pump.

APPLICATION

TECHNICAL DRAWING

SPECIFICATIONS :

Power supply

115-230Vac ±10% 50/60Hz

Max rated current

16A

Starting pressure range

0,5÷8 bar

Max allowable pressure

10 bar

Protection degree

IP 65

Max fluid temperature

30°C

Max ambient temperature

35°C

Hydraulic connections

1”M